2024 Realistic Verified D-PST-DY-23 exam dumps Q&As - D-PST-DY-23 Free Update
Use Real D-PST-DY-23 Dumps - 100% Free D-PST-DY-23 Exam Dumps
EMC D-PST-DY-23 exam covers a wide range of topics, including Dell PowerStore architecture, installation and configuration, data protection, and management. Candidates who pass D-PST-DY-23 exam will have a deep understanding of Dell PowerStore storage solutions and be able to effectively deploy and manage these systems in their organization.
NEW QUESTION # 25
Which of me following is true statement?
- A. PowerStore 500 is not NEBS-compliant
- B. End-to-end NVMe-oF is supported with FC only
- C. End-to-end NVMe-oF is supported with TCP only
- D. PowerStore 500 is NEBS-compliant
Answer: D
NEW QUESTION # 26
A PowerStore administrator is creating a host group.
Which two protocol types can be selected for a new host group? (Choose two.)
- A. NVMe/TCP
- B. InfiniBand
- C. FC
- D. iSCSI
Answer: A,D
NEW QUESTION # 27
Place the steps in the correct order to map a PowerStore volume to a NVMe host.
Answer:
Explanation:
Explanation:
NEW QUESTION # 28
An administrator is attempting to create a protection policy while creating an SMB share however the option is not available.
What is the reason?
- A. The protection policy must be created before associating it with the file system
- B. The protection policy has been previously associated with a file system
- C. The protection policy is only available with file level retention enabled
- D. The protection policy must be created before associating it with the volume resource
Answer: A
NEW QUESTION # 29
Which two methods would a customer use to migrate their legacy block thick and thin clones to PowerStore?
(Choose two.)
- A. Agentless Import
- B. SAN Copy
- C. Mirrorview
- D. VM Import
- E. Non-disruptive Import
Answer: A,E
NEW QUESTION # 30
The wan connection between the production and DR sites has a low latency of <5 milliseconds.
Which firewall port is used by PowerStore to communicate between sites?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 31
A customer has a new PowerStore T system that has been running for 45 days with multiple host systems attached. A user with the storage administrator role attempts to create a volume for a host, but the option is unavailable.
What is the cause?
- A. Incorrect privileges are assigned
- B. The host is incorrectly zoned
C Permanent license has not been applied - C. Appliance has reached the 90% full threshold
Answer: A
NEW QUESTION # 32
What is the maximum supported PowerStore volume size in TB?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 33
A PowerStore T administrator discovers that only one port on each node is active and passing traffic. The other port is healthy and online, but total bandwidth is only half of what the customer expects.
Which two actions could resolve the issue? (Choose two.)
- A. Configure RSTP
- B. Configure VLT
- C. Configure LACP
- D. Configure Dynamic LAG
Answer: C,D
NEW QUESTION # 34
Which are the two asynchronous file-replication configuration requirements? (Choose two.)
- A. Map the File Mobility Network to Management Network
- B. Map the File Mobility Network to Storage Network
- C. Configure the File Mobility Network IP address on Storage Network subnet and VLAN
- D. Configure the File Mobility Network IP address on Management subnet and VLAN
Answer: B,C
NEW QUESTION # 35
A storage administrator with a small budget must deploy a new scalable block-optimized storage solution requiring NVMe-oF without adding a license.
Which PowerStore configuration would meet the requirements?
- A. 500 T with one expansion enclosure
- B. 500 X with one expansion enclosure
- C. 500 T with no expansion enclosure
- D. 500 X with no expansion enclosure
Answer: C
NEW QUESTION # 36
An administrator is asked to create NVMe-vVol host in PowerStore.
Which requirement must be met to complete the task?
- A. Switches must support NVMe/TCP protocol
- B. NVMe-vVol must be created on internal hosts
- C. Two appliances must be available to allow NVMe-vVol migration
- D. The host must be using the ESXi operating system
Answer: D
NEW QUESTION # 37
Which two steps can he used to apply the license manually on a PowerStore with no internet connection?
(Choose two.)
- A. Download the activation file from PowerStore Manager
- B. Upload the activation file to https://licensing.emc.com/#/activationByConfig
- C. Upload the activation file to the PowerStore appliance
- D. Download the license file from https://license.emc.com/#/activationByConfig
Answer: A,C
NEW QUESTION # 38 
An administrator is setting up a new ESXi cluster using NVMe over TCP. The administrator is given the following parameters:
Volume Details
Name: nvme-ds-01
Category: Virtualization
Application: Containers/Kubernetes
Volume Performance Policy: High
Size: 2 TB
Host Details
Name: ESXi-01
Initiator Type: NVMe
Host Mappings: NVMe
Use the simulator to add the host and the volume and give the host access to the volume using the above parameters.
When you have finished, continue to the next question.
Answer:
Explanation:
See the steps in Explanation.
Explanation:
1. On the simulator, click on theStoragetab on the left sidebar. Then click on theVolumessubtab. You will see a list of existing volumes on the cluster.
2. To create a new volume, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the volume details.
3. Enter the name of the volume asnvme-ds-01. Select the category asVirtualizationand the application asContainers/Kubernetes. These are optional fields that help you organize and identify your volumes.
4. Select the volume performance policy asHigh. This will optimize the volume for high performance and low latency. You can also customize the policy by clicking on theAdvancedbutton and adjusting the settings.
5. Enter the size of the volume as2 TB. You can also enable thin provisioning, compression, and deduplication if you want to save space and improve efficiency. Click on theCreatebutton to create the volume.
6. You will see a confirmation message that the volume has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new volume in the list of volumes.
7. To add a new host, click on theHostssubtab on the left sidebar. You will see a list of existing hosts on the cluster.
8. To create a new host, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the host details.
9. Enter the name of the host asESXi-01. Select the initiator type asNVMe. This will enable the host to use the NVMe over TCP protocol to access the volumes.
10. To add the host mappings, click on theAdd Mappingbutton. A dialog box will appear where you can select the volume and the access type.
11. Select the volumenvme-ds-01from the drop-down menu. Select the access type asNVMe. This will map the volume to the host using the NVMe over TCP protocol. Click on theAddbutton to add the mapping.
12. You will see the mapping in the list of host mappings. You can add more mappings if you want to map more volumes to the host. Click on theCreatebutton to create the host.
13. You will see a confirmation message that the host has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new host in the list of hosts.
14. You have completed the task of adding the host and the volume and giving the host access to the volume using the NVMe over TCP protocol. You can verify the configuration by clicking on the host or the volume and checking the details.
NEW QUESTION # 39
An administrator removes a volume from an existing volume group which is part of replication. The system generates an error stating that it cannot create a replication session for the volume.
Why does removing the volume generate an error message?
- A. The volume is not mapped to the volume group host
- B. The volume group configuration must be synchronized
- C. The volume group alerts must be acknowledged
- D. The volume already has a protection policy
Answer: D
NEW QUESTION # 40
A PowerStore user has a business need for file system snapshots of NAS Server NAS1 with the following attributes:
Taken M-F every 2 hours
Retention of 2 days
The snapshots must be accessible through the Previous Versions menu in Windows Using the PowerStore Simulator, make the appropriate configuration change.
When you have finished, continue to the next question.
Answer:
Explanation:
see the Explanation for the solution.
Explanation:
1. Launch the PowerStore Simulator and log in with the admin credentials.
2. On the left navigation pane, click Protection and then click Protection Policies.
3. Click Create Policy and enter a name and description for the policy, such as NAS1 Snapshot Policy.
4. Under Snapshot Rules, click Add Rule and configure the following settings:
5. Name: Enter a name for the rule, such as NAS1 Snapshot Rule.
6. Schedule: Select Custom and enter the following cron expression: 0 */2 * * 1-5. This expression means that the snapshots will be taken every 2 hours on Monday to Friday
7. Retention: Select Until and enter 2 days. This means that the snapshots will be deleted after 2 days.
8. Access Type: Select Snapshot. This means that the snapshots will be accessible through the Previous Versions menu in Windows
9. Click Save to create the snapshot rule and then click Next.
10. Under Replication Rules, click Skip. This means that no replication rule will be added to the policy.
11. Click Next and then click Finish to create the protection policy.
12. On the left navigation pane, click Storage and then click File Systems.
13. Select the file system that belongs to NAS Server NAS1 and click More Actions.
14. Click Edit and then click Protection Policy.
15. Select the protection policy that was created in the previous steps, such as NAS1 Snapshot Policy, and click Save.
16. Click Confirm to apply the protection policy to the file system.
NEW QUESTION # 41
......
EMC D-PST-DY-23 exam is one of the most in-demand certification exams in the storage industry. Dell PowerStore is a popular storage solution that is used by many organizations worldwide. Certified professionals who have passed D-PST-DY-23 exam are in high demand for their expertise in deploying and managing Dell PowerStore solutions. They are also well-compensated for their skills and knowledge.
Achieving the EMC D-PST-DY-23 certification validates the candidate’s skills and knowledge in deploying and managing Dell PowerStore solutions. Dell PowerStore Deploy 2023 Exam certification is recognized globally and can help IT professionals enhance their career opportunities and salary potential. Overall, the EMC D-PST-DY-23 exam is an important step for IT professionals seeking to advance their careers in the field of storage solutions.
Pass D-PST-DY-23 exam Updated 42 Questions: https://freetorrent.braindumpsvce.com/D-PST-DY-23_exam-dumps-torrent.html