Latest [Dec 04, 2025] Hitachi HQT-6714 Real Exam Dumps PDF
HQT-6714 Practice Test Questions Updated 112 Questions
NEW QUESTION # 43
The CLI command used to verify the configuration and status of replication pairs in Hitachi Universal Replicator is ________.
- A. pairresync
- B. paircreate
- C. pairchk
- D. pairverify
Answer: C
NEW QUESTION # 44
Hitachi Ops Center Protector does not support manual synchronization of data between primary and secondary sites.
- A. True
- B. False
Answer: B
NEW QUESTION # 45
In the setup of Hitachi Universal Replicator using CLI, which component is essential for storing a copy of the write operations pending synchronization?
- A. Command device
- B. Buffer volume
- C. Journal volume
- D. Secondary volume
Answer: C
NEW QUESTION # 46
In what scenario is Hitachi Universal Replicator most beneficial for enterprise data replication?
- A. When the primary and secondary sites are geographically distant
- B. When data volume is low but requires high availability
- C. When all data must be encrypted before replication
- D. When the replication window is small and requires high throughput
Answer: A
NEW QUESTION # 47
Which feature of Hitachi Universal Replicator allows it to minimize the performance impact on the primary storage system during peak load times?
- A. Offloading processing to dedicated replication units
- B. Throttling replication based on system load
- C. Segmenting network traffic
- D. Using snapshot technologies
Answer: A
NEW QUESTION # 48
What is the function of the 'pairchk' command in the context of Hitachi Universal Replicator using the CLI?
- A. It configures new storage arrays for replication.
- B. It verifies the configuration and status of replication pairs.
- C. It checks the health and connectivity of the physical disks.
- D. It restarts all replication services after a failure.
Answer: B
NEW QUESTION # 49
In a Global-Active Device environment, what role does Delta Resync play during operational disruptions?
- A. It temporarily suspends all replication activities.
- B. It synchronizes only the changed data blocks to minimize recovery time.
- C. It restarts all operations from the beginning of the transaction log.
- D. It increases the replication frequency to ensure data consistency.
Answer: B
NEW QUESTION # 50
Which configuration ensures that a second copy of data is asynchronously replicated to a third site after synchronous replication between the primary and secondary sites?
- A. Multitarget configuration
- B. Cascade configuration
- C. Uniform spread configuration
- D. Parallel configuration
Answer: B
NEW QUESTION # 51
What is the primary function of the Command Control Interface (CCI) in the context of Hitachi Universal Replicator?
- A. To manage user permissions on storage devices
- B. To update firmware on physical storage drives
- C. To execute replication commands and monitor their status
- D. To configure network settings on storage arrays
Answer: C
NEW QUESTION # 52
In Hitachi Universal Replicator, the command used to restart a failed replication process is ________.
- A. pairresync
- B. paircreate
- C. pairrestart
- D. pairrecover
Answer: A
NEW QUESTION # 53
When configuring Hitachi Ops Center Protector, what is the purpose of the "Protection Policy"?
- A. To configure network settings on storage arrays
- B. To set password policies for the Ops Center users
- C. To define replication characteristics like RPO and RTO
- D. To automate the scheduling of snapshot backups
Answer: C
NEW QUESTION # 54
How do Global-Active Device operations enhance 3DC configurations in terms of data accessibility?
- A. By limiting access to data during peak usage times
- B. By reducing the amount of data stored at each site
- C. By segmenting data based on its criticality
- D. By enabling real-time data access at any site
Answer: D
NEW QUESTION # 55
Which of the following best describes the purpose of the 'pairsplit' command in the Command Control Interface?
- A. It links two storage volumes for replication.
- B. It temporarily suspends replication activities.
- C. It permanently stops and deletes replication pairs.
- D. It checks for errors in replication configuration.
Answer: B
NEW QUESTION # 56
To confirm that all components of the Hitachi Universal Replicator are properly synchronized, use the _____ command.
- A. paircheck
- B. pairvalidate
- C. pairscan
- D. pairsync
Answer: A
NEW QUESTION # 57
The 'pairchk' command in the Command Control Interface is used to ________.
- A. Synchronize replication pairs with the primary site
- B. Delete replication pairs
- C. Create new replication pairs
- D. Check the health and connectivity of replication pairs
Answer: D
NEW QUESTION # 58
Which feature of Hitachi Universal Replicator ensures that data remains consistent during long-distance replication?
- A. Write-order fidelity
- B. Real-time compression
- C. Inline deduplication
- D. High-speed caching
Answer: A
NEW QUESTION # 59
The _______ command is used to verify the status of the replication pairs in the Command Control Interface.
- A. paircheck
- B. pairdisplay
- C. pairstatus
- D. pairverify
Answer: B
NEW QUESTION # 60
Consistency of data across multiple volumes is achieved through the configuration of _______.
- A. storage pools
- B. data checkpoints
- C. consistency groups
- D. virtual LUNs
Answer: C
NEW QUESTION # 61
......
Hitachi HQT-6714 Dumps - Secret To Pass in First Attempt: https://freetorrent.braindumpsvce.com/HQT-6714_exam-dumps-torrent.html