NSK200 Updated Exam Dumps [2024] Practice Valid Exam Dumps Question
NSK200 Sample with Accurate & Updated Questions
NEW QUESTION # 15
Your company has Microsoft Azure ADFS set up as the Identity Provider (idP). You need to deploy the Netskope client to all company users on Windows laptops without user intervention.
In this scenario, which two deployment options would you use? (Choose two.)
- A. Deploy the Netskope client using an email Invitation.
- B. Deploy the Netskope client using IdP.
- C. Deploy the Netskope client with SCCM.
- D. Deploy the Netskope client with Microsoft GPO.
Answer: C,D
Explanation:
Explanation
To deploy the Netskope client to all company users on Windows laptops without user intervention, you can use either SCCM or GPO. These are two methods of packaging the application and pushing it silently to the user's device using Microsoft tools4. These methods donot require the user to have local admin privileges or to initiate the installation themselves. They also allow enforcing the use of the client through company policy. The Netskope client can authenticate the user using Azure ADFS as the identity provider, as long as the UPN of the logged in user matches the directory5
NEW QUESTION # 16
Review the exhibit.
You receive a service request from a user who indicates that theirNetskope client is in a disabled state. The exhibit shows an excerpt (rom the affected client nsdebuglog.log.
What is the problem in this scenario?
- A. Custom installation parameters are incorrectly specified
- B. User authentication failed during IdP-based enrollment.
- C. The user's account has not been provisioned into Netskope.
- D. The Netskope client connection is being decrypted.
Answer: D
Explanation:
Explanation
The problem in this scenario is that the Netskope client connection is being decrypted by a network security device. This is evident from the log message "ERROR SSL certificate verification failed: self signed certificate in certificate chain". This means that the Netskope client is receiving a certificate that is not issued by Netskope, but by a device that is intercepting and decrypting the traffic between the client and the Netskope cloud. This can cause the client to fail to download the required configuration and remain in a disabled state1.
Therefore, option B is correct and the other options are incorrect. References: Troubleshooting Netskope Client - Netskope Knowledge Portal, Using Netskope Client - Netskope Knowledge Portal
NEW QUESTION # 17
After deploying the Netskope client to a number of devices, users report that the Client status indicates
"Admin Disabled". User and gateway information is displayed correctly in the client configuration dialog Why are clients installing in an "Admin Disabled" state in this scenario?
- A. The user's account has no mail ID attribute In Active Directory.
- B. The user's identity is not synchronized to Netskope.
- C. All devices were previously disabled by the administrator.
- D. The user's password was incorrect during enrollment.
Answer: C
Explanation:
Explanation
The Netskope client can be disabled by the administrator from the Netskope console. This is useful for troubleshooting or maintenance purposes. When the client is disabled by the administrator, it shows the status as "Admin Disabled" and does not apply any policies or steer any traffic. The user cannot enable the client unless the administrator enables it from the console. The other options are not valid reasons for the client to be in an "Admin Disabled" state. References: Netskope Client Status 1, Enable or Disable Netskope Client 2
NEW QUESTION # 18
You are having issues with fetching user and group Information periodically from the domain controller and posting that information to your tenant instance in the Netskope cloud. To begin the troubleshooting process, what would you Investigate first in this situation?
- A. Directory Importer
- B. AD Connector
- C. On-Premises Log Parser
- D. DNS Connector
Answer: A
Explanation:
Explanation
The Directory Importer is a component of the Netskope Adapters that connects to the domain controller and periodically fetches user and group information to post that info to your tenant instance in the Netskope cloud1. If you are having issues with this process, the first thing you should investigate is the Directory Importer itself. You can check the status of the Directory Importer service, the configuration file, the logs, and the connectivity to the domain controller and the Netskope cloud2. Therefore, option B is correct and the other options are incorrect. References: Configure Directory Importer - Netskope Knowledge Portal, Troubleshooting Directory Importer - Netskope Knowledge Portal
NEW QUESTION # 19
Which statement describes how Netskope's REST API, v1 and v2, handles authentication?
- A. Both REST API v1 and v2 require the use of tokens to make calls to the API
- B. REST API v1 requires the use of a token to make calls to the API. while API v2 does not.
- C. REST API v2 requires the use of a token to make calls to the API. while API vl does not.
- D. Neither REST API v1 nor v2 require the use of tokens.
Answer: A
Explanation:
Explanation
The statement that describes how Netskope's REST API, v1 and v2, handles authentication is A. Both REST API v1 and v2 require the use of tokens to make calls to the API. A token is a unique string that identifies the user or application that is making the API request. The token must be included in the HTTP header of every API call as an authorization parameter1. The token can be generated from the Netskope UI or from the Netskope Platform API2. The token can also be revoked or refreshed as needed3. Therefore, option A is correct and the other options are incorrect. References: REST API v1 Overview - Netskope Knowledge Portal, Netskope PlatformAPI Endpoints for REST API v1 - Netskope Knowledge Portal, REST API v2 Overview - Netskope Knowledge Portal
NEW QUESTION # 20
A customer wants to use Netskope to prevent PCI data from leaving the corporate sanctioned OneDrive instance. In this scenario. which two solutions would assist in preventing data exfiltration? (Choose two.)
- A. Cloud Firewall (CFW)
- B. SaaS Security Posture Management (SSPM)
- C. Real-time Protection
- D. API Data Protection
Answer: C,D
Explanation:
Explanation
To prevent PCI data from leaving the corporate sanctioned OneDrive instance, the customer can use API Data Protection and Real-time Protection. API Data Protection is a feature that allows you to discover, classify, and protect data that is already resident in your cloud services, such as OneDrive. You can create a policy that matches the PCI data based on criteria such as users, content, activity, or DLP profiles. Then, you can choose an action to prevent the PCI data from being shared or exfiltrated, such as remove external collaborators, remove public links, or quarantine3. Real-time Protection is a feature that allows you to inspect and control data in transit between your users and cloud services, such as OneDrive. You can create a policy that matches the PCI data based on criteria such as users, devices, locations, categories, or DLP profiles. Then, you can choose an action to prevent the PCI data from being uploaded or downloaded, such as block, alert, encrypt, or watermark4. Therefore, options A and D are correct and the other options are incorrect. References: API Data Protection - Netskope Knowledge Portal, Real-time Protection - Netskope Knowledge Portal
NEW QUESTION # 21
To which three event types does Netskope's REST API v2 provide access? (Choose three.)
- A. application
- B. alert
- C. client
- D. infrastructure
- E. user
Answer: A,B,D
Explanation:
Explanation
Netskope's REST API v2 provides access to various event types via URI paths. The event types include application, alert, infrastructure, audit, incident, network, and page. These event types can be used to retrieve data from Netskope's cloud security platform. The event types client and user are not supported by the REST API v2. References: REST API v2 Overview, Cribl Netskope Events and Alerts Integration, REST API Events and Alerts Response Descriptions
NEW QUESTION # 22
An engineering firm is using Netskope DLP to identify and block sensitive documents, including schematics and drawings. Lately, they have identified that when these documents are blocked, certain employees may be taking screenshots and uploading them. They want to block any screenshots from being uploaded.
Which feature would you use to satisfy this requirement?
- A. optical character recognition (OCR)
- B. document fingerprinting
- C. exact data match (EDM)
- D. ML image classifier
Answer: D
Explanation:
Explanation
To block any screenshots from being uploaded, the engineering firm should use the ML image classifier feature of Netskope DLP. This feature uses machine learning to detect sensitive information within images, such as screenshots, whiteboards, passports, driver's licenses, etc. The firm can create a DLP policy that blocks any image upload that matches the screenshot classifier. This will prevent employees from circumventing the DLP controls by taking screenshots of sensitive documents. References: Improved DLP Image Classifiers, Netskope Data Loss Prevention, The Importance of a Machine Learning-Based Source Code Classifier
NEW QUESTION # 23
Review the exhibit.
You are asked to create a DLP profile that will ensure that the data shown in the exhibit cannot be uploaded to a user's personal Google Drive.
What must be used to accomplish this task?
- A. INTL-PAN-Name rule
- B. optical character recognition
- C. document fingerprinting
- D. ML image classifier
Answer: B
Explanation:
Explanation
To create a DLP profile that will ensure that the data shown in the exhibit cannot be uploaded to a user's personal Google Drive, you need to use optical character recognition (OCR). OCR is a feature that allows you to detect and extract text from images and scanned documents. You can use OCR in your DLP profiles to identify sensitive data that is embedded or hidden in images1. In the exhibit, we can see that the data is a credit card number, which is a type of sensitive data that can be easily identified by OCR. You can create a DLP profile that uses OCR and matches the credit card number data identifier or a custom regex expression. You can then apply an action such as block, alert, or quarantine to prevent the data from being uploaded to Google Drive2. Therefore, option C is correct and the other options are incorrect. References: Optical Character Recognition (OCR) - Netskope Knowledge Portal, Add a Policy for Data Protection - Netskope Knowledge Portal
NEW QUESTION # 24
You want to provision users and groups to a Netskope tenant. You have Microsoft Active Directory servers hosted in two different forests. Which statement is true about this scenario?
- A. You can use the Netskope virtual appliance for user provisioning
- B. You cannot provision users until you migrate to Azure AD or Okta.
- C. You can use SCIM version 2 for user provisioning.
- D. You can use the Netskope Adapter Tool for user provisioning.
Answer: C
Explanation:
Explanation
You can use SCIM version 2 for user provisioning in this scenario. SCIM (System for Cross-domain Identity Management) is a standard protocol for exchanging identity information across different cloud applications.
Netskope supports SCIM version 2 and can integrate with identity providers (IdPs) that follow the same standard, such as Microsoft Azure AD, Okta, OneLogin, and Ping Identity. You can use SCIM to provision users and groups from multiple Active Directory forests to a Netskope tenant. The other options are not valid for this scenario. The Netskope Adapter Tool and the Netskope virtual appliance are used for user identification, not provisioning. They can only connect to one Active Directory forest at a time. You do not need to migrate to Azure AD or Okta to provision users, as Netskope supports other IdPs that use SCIM as well. References: Provisioning Users for Netskope Client1, SCIM Integration2
NEW QUESTION # 25
Your organization has three main locations with 30.000 hosts in each location. You are planning to deploy Netskope using iPsec tunnels for security.
What are two considerations to make a successful connection in this scenario? (Choose two.)
- A. browsers in use
- B. redundant POPs
- C. number of hosts
- D. operating systems
Answer: B,C
Explanation:
Explanation
To deploy Netskope using IPSec tunnels for security in this scenario, two considerations to make a successful connection are C. redundant POPs and D. number of hosts. Redundant POPs are Points of Presence that are geographically distributed data centers that host the Netskope cloud platform. You need to consider redundant POPs to ensure high availability and resiliency of your IPSec tunnels in case of a failure or outage in one of the POPs. You can configure multiple IPSec tunnels from your network to different POPs and use dynamic routing protocols such as BGP to load balance and failover the traffic1. Number of hosts is the number of devices or endpoints that will use the IPSec tunnels to access the cloud services. You need to consider the number of hosts to estimate the bandwidth and throughput requirements of your IPSec tunnels and choose the appropriate POPs that can handle the traffic volume. You can use the Netskope Bandwidth Calculator tool to estimate the bandwidth and throughput based on the number of hosts, locations, and cloud services2.
Therefore, options C and D are correct and the other options are incorrect. References: IPSec - Netskope Knowledge Portal, Netskope Bandwidth Calculator
NEW QUESTION # 26
Your learn is asked to Investigate which of the Netskope DLP policies are creating the most incidents. In this scenario, which two statements are true? (Choose two.)
- A. You can create a report using Reporting or Advanced Analytics.
- B. The Skope IT Alerts tab will list the top five DLP policies.
- C. The Skope IT Applications tab will list the top five DLP policies.
- D. You can see the top Ave DLP policies triggered using the Analyze feature
Answer: A,D
Explanation:
Explanation
To investigate which of the Netskope DLP policies are creating the most incidents, the following two statements are true:
You can see the top five DLP policies triggered using the Analyze feature. The Analyze feature allows you to create custom dashboards and widgets to visualize and explore your data. You can use the DLP Policy widget to see the top five DLP policies that generated the most incidents in a given time period3.
You can create a report using Reporting or Advanced Analytics. The Reporting feature allows you to create scheduled or ad-hoc reports based on predefined templates or custom queries. You can use the DLP Incidents by Policy template to generate a report that shows the number of incidents per DLP policy4. TheAdvanced Analytics feature allows you to run SQL queries on your data and export the results as CSV or JSON files. You can use the DLP_INCIDENTS table to query the data by policy name and incident count5.
The other two statements are not true because:
The Skope IT Applications tab will not list the top five DLP policies. The Skope IT Applications tab shows the cloud app usage and risk summary for your organization. It does not show any information about DLP policies or incidents6.
The Skope IT Alerts tab will not list the top five DLP policies. The Skope IT Alerts tab shows the alerts generated by various policies and profiles, such as DLP, threat protection, IPS, etc. It does not show the number of incidents per policy, only the number of alerts per incident7.
NEW QUESTION # 27
Your company has many users thatare remote and travel often. You want to provide the greatest visibility into their activities, even while traveling. Using Netskope. which deployment method would be used in this scenario?
- A. Use a Netskope client.
- B. Use a GRE tunnel.
- C. Use an IPsec tunnel.
- D. Use proxy chaining.
Answer: A
Explanation:
Explanation
The best deployment method for remote and traveling users is to use a Netskope client. The Netskope client is a lightweight software agent that runs on the user's device and steers web and cloud traffic to the Netskope cloud for real-time inspection and policy enforcement1. The Netskope client provides an always-on end user remote access experience and avoids backhauling (or hairpinning) remote users through the corporate network to access applications in public cloud environments2. The Netskope client also supports offline mode, which allows users to work offline and sync their policies when they reconnect to the internet
NEW QUESTION # 28
You are integrating Netskope tenant administration with an external identity provider. You need to implement role-based access control. Which two statements are true about this scenario? (Choose two.)
- A. You do not need to define the administrators locally in the Netskope tenant after It Is integrated with IdP.
- B. You need to define the administrators locally in the Netskope tenant.
- C. The roles you want to assign must be present in the Netskope tenant.
- D. Once integrated withIdP. you must append the "locallogin" URL to log in using IdP
Answer: B,C
Explanation:
Explanation
To implement role-based access control when integrating Netskope tenant administration with an external identity provider (IdP), two statements that are true about this scenario are A. The roles you want to assign must be present in the Netskope tenant and C. You need to define the administrators locally in the Netskope tenant. Role-based access control (RBAC) is a feature that allows you to assign different levels of permissions and access to the Netskope tenant based on the user's role. You can use RBAC to integrate Netskope tenant administration with an external IdP such as Azure AD or Okta and delegate administrative tasks to different users or groups1. To do this, you need to ensure that the roles you want to assign are present in the Netskope tenant. You can use the predefined roles such as SYSADMIN, AUDITOR, or OPERATOR, or create custom roles with specific privileges2. You also need to define the administrators locally in the Netskope tenant by creating local user accounts and assigning them roles. You can use the same email address as the IdP user account for the local useraccount3. Therefore, options A and C are correct and the other options are incorrect. References: Role-Based Access Control - Netskope Knowledge Portal, Roles - Netskope Knowledge Portal, Integrate with Azure AD - Netskope Knowledge Portal
NEW QUESTION # 29
You are using the Netskope DLP solution. You notice flies containing test data for credit cards are not triggering DLP events when uploaded to Dropbox. There are corresponding page events. Which two scenarios would cause this behavior? (Choose two.)
- A. There is no API protection configured for Dropbox.
- B. The Netskope client Is not steering Dropbox traffic.
- C. The credit card numbers in your test data are Invalid 16-dlglt numbers.
- D. The DLP rule has the severity threshold set to a value higher than the number of occurrences.
Answer: C,D
Explanation:
Explanation
There are two possible scenarios that would cause the behavior of files containing test data for credit cards not triggering DLP events when uploaded to Dropbox. One scenario is that the DLP rule has the severity threshold set to a value higher than the number of occurrences. This means that the rule will only trigger an event if the number of matches for the sensitive data exceeds the specified threshold. For example, if the rule has a severity threshold of 10 and the file contains only 5 credit card numbers, then no event will be generated. To fix this, you can lower the severity threshold or remove it altogether. The other scenario is that the credit card numbers in your test data are invalid 16-digit numbers. This means that the numbers do not pass the Luhn algorithm check, which is a validation method used by Netskope DLP to detectvalid credit card numbers. For example, if the number is 1234-5678-9012-3456, then it is not a valid credit card number and will not be detected by Netskope DLP. To fix this, you can use valid test credit card numbers that pass the Luhn algorithm check. The other options are not valid scenarios for this behavior. The Netskope client is not steering Dropbox traffic is not a valid scenario because there are corresponding page events, which means that the traffic is being steered to Netskope. There is no API protection configured for Dropbox is not a valid scenario because API protection is not required for DLP detection on file uploads, which are handled by real-time protection. References: DLP Rule Settings1, Credit Card Number Detection2
NEW QUESTION # 30
......
Pass Netskope NSK200 Premium Files Test Engine pdf - Free Dumps Collection: https://freetorrent.braindumpsvce.com/NSK200_exam-dumps-torrent.html