VMware 2V0-16.25 Real Exam Questions Test Engine Dumps Training With 62 Questions
2V0-16.25 Actual Questions Answers PDF 100% Cover Real Exam Questions
VMware 2V0-16.25 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 34
A network failure of a host occurred in a VMware vSphere Foundation (VVF) vSphere cluster. None of the virtual machines (VMs) restarted on unaffected hosts and the VMs were unreachable until the problem was corrected.
vSphere HA and DRS are enabled, and all tests when powering off a host were successful.
What is the cause of this behavior?
- A. vSphere DRS has not been enabled on the cluster.
- B. The VMs have "should run on" host affinity rule applied.
- C. vSphere HA has not been enabled on the cluster.
- D. Host Isolation Response is disabled in vSphere HA.
Answer: D
Explanation:
In this scenario, anetwork failureoccurred on a host, and VMs on that host didnot restart on other hosts, even thoughHA and DRS were enabled.
* This indicates thatvSphere HA detected an isolation event(the host lost network connectivity) but tookno action, because theHost Isolation Response was disabled.
* Normally, with Host Isolation Response set to "Power Off and Restart VMs," HA restarts affected VMs on surviving hosts.
* Since powering off a host manually triggers a restart correctly, the failure here was specific toisolation behavior.
Other options:
* B. Affinity rule "should run on"# Would still allow HA restart elsewhere if isolation occurred.
* C. DRS not enabled# DRS only balances load; HA is responsible for restarts.
* D. HA not enabled# Contradicts the scenario (HA was enabled).
References:
VMware vSphere 9.0 -HA Isolation Response Settings
VMware KB 1002117 -Understanding Isolation Response in vSphere HA
NEW QUESTION # 35
Which VMware Cloud Foundation (VCF) Operations for Logs capability facilitates root cause analysis and troubleshooting?
- A. Log Querying
- B. Dashboarding
- C. Alerting
- D. Log Forwarding
Answer: A
Explanation:
TheVCF Operations for Logs capabilitymost useful forroot cause analysis and troubleshootingisLog Querying.
* Allows searching, filtering, and correlating log events to diagnose issues.
* Log Forwarding (A)# Sends logs elsewhere, not analysis.
* Alerting (B)# Notifies about issues but does not provide investigation details.
* Dashboarding (C)# Provides visualization, but root cause analysis requiresqueries.
References:
VMware Cloud Foundation 9.0 -VCF Operations for Logs Capabilities
VMware Docs: Using Log Insight for Root Cause Analysis
NEW QUESTION # 36
An administrator is tasked to implement a new iSCSI storage for a new cluster.
The following information was provided to the administrator:
* iSCSI storage controller IPs are all in the same subnet.
* Multipathing should be used.
* Storage supports Asymmetric Logical Unit Access (ALUA).
* Should be configured for high performance.
Which are the four required steps to configure this on an ESX host? (Choose four.)
- A. Configure two unbound VMkernel ports.
- B. Configure 1 vSwitch with 2 Uplinks.
- C. Configure 2 vSwitch with 1 Uplink.
- D. Configure two bound VMkernel ports.
- E. Add iSCSI software adapter.
- F. Add NVMe over TCP software adapter.
- G. Set Path Selection Policy (PSP) to Most Recently Used (MRU).
- H. Set Path Selection Policy (PSP) to Round Robin (RR).
Answer: B,D,E,H
Explanation:
ForiSCSI multipathing with ALUAandhigh performancein ESXi:
* 1 vSwitch with 2 Uplinks# Standard design for redundancy and multipathing. (B)
* Add iSCSI software adapter# Required to connect to storage. (E)
* Configure two bound VMkernel ports# Ensures multipathing (one per uplink). (G)
* Set PSP to Round Robin (RR)# Optimizes I/O balancing across multiple paths. (F) Other options:
* A. 2 vSwitches with 1 Uplink each# Not recommended, complicates multipathing.
* C. NVMe over TCP# Not relevant, storage is iSCSI.
* D. MRU policy# Legacy, not high performance.
* H. Unbound VMkernel ports# Used for software iSCSI port binding, but "bound" VMkernel ports are required for multipathing.
References:
VMware vSphere 9.0 -iSCSI Configuration with Multipathing
VMware KB 2038869 -Configuring Round Robin PSP with iSCSI
NEW QUESTION # 37
An administrator enables the VMware Cloud Foundation (VCF) Operations orchestrator Plug-in for VMware vSphere Web Client service on a VCF Operations orchestrator appliance.
How many vSphere instances can be integrated in the vSphere Client through the VCF Operations orchestrator plug-in?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
TheVCF Operations Orchestrator Plug-in for VMware vSphere Web Clientallows orchestration workflows directly in the vSphere Client.
* However,only one vSphere instance can be integratedat a time with the vSphere Client via this plug-in.
* This limitation ensures a consistent, single orchestration endpoint per vSphere Client environment.
Other options (8, 10, 15) apply to scaling of vCenter or data sources but not to the Orchestrator Plug-in integration.
References:
VMware Cloud Foundation 9.0.1 -Orchestrator Plug-in Integration Limits
VMware Docs: vRealize Orchestrator Plug-in for vSphere Web Client
NEW QUESTION # 38
During a recent audit, it was determined that a group of users may have been compromised. These users should not have access to any VMware vCenter resources while an investigation is underway. All the affected users have been placed into a SUSPECT_USERS group.
Which step is required to ensure that the suspect users will never have access to resources in vCenter?
- A. Assign the SUSPECT_USERS group the No access role to the vCenter Object and check propagate.
- B. Assign the SUSPECT_USERS group the Read-only role to the vCenter Object and check propagate.
- C. Assign the SUSPECT_USERS group the Administrator role to the vCenter Object and uncheck propagate.
- D. Disconnect the vCenter from Active Directory.
Answer: A
Explanation:
To ensurecompromised users cannot access vCenter resources:
* Assign theNo Accessrole at the vCenter level.
* Enable propagationso this restriction applies to all child objects.
* This guaranteeszero permissionsfor SUSPECT_USERS.
Other options:
* B. Administrator with uncheck propagate# Still gives dangerous access at root level.
* C. Disconnect Active Directory# Disrupts all AD users, not just suspect ones.
* D. Read-only role# Still grants access, not acceptable during investigation.
References:
VMware vSphere 9.0 -Roles and Permissions Best Practices
VMware KB 1025569 -Assigning the No Access Role in vCenter
NEW QUESTION # 39
How does an administrator configure VMware Cloud Foundation (VCF) Operations for logs to send Notifications and Metrics to VCF Operations?
- A. Launch the wizard from VCF Operations for Logs.
- B. Configure the Integration through VCF Operations for Logs.
- C. Launch the wizard from VCF Operations.
- D. Configure the Integrations through VCF Operations.
Answer: D
Explanation:
To configureVMware Cloud Foundation (VCF) Operations for logsso that it can send notifications and metrics, administrators must use theIntegrations workflow inside VCF Operations.
* You configure integrations centrally from theAdministration > Integrationspage in VCF Operations.
* Here you add theVCF Operations for Logs data source, configure credentials, and set up Webhooks for alerts.
* Once integration is completed, VCF Operations for Logs data can be consumed in VCF Operations dashboards and used for notifications and metrics.
This process is not launched directly from "VCF Operations for Logs," but rather fromVCF Operations itself, where all integrations (vCenter, vSAN, NSX, and Logs) are centrally managed.
References:
VMware Cloud Foundation 9.0.2 -Integrating Data Sources with VCF Operations VMware Cloud Foundation 9.0.3 -Configure VCF Operations for logs integration
NEW QUESTION # 40
An administrator is tasked to deploy a new eight-node VMware vSAN Express Storage Architecture (ESA) cluster.
What are three minimum requirements to accomplish this? (Choose three.)
- A. 25GbE network interfaces
- B. SAS solid-state disk (SSD)
- C. 256GB Memory
- D. 10GbE network interfaces
- E. PCIe flash device (NVMe)
- F. 128GB Memory
Answer: A,E,F
Explanation:
ForvSAN ESA (Express Storage Architecture), minimum requirements differ from OSA:
* 25GbE NICsare required to handle high-performance traffic. (C)
* NVMe PCIe flash devicesmust be used for storage. (D)
* 128GB Memory minimumper host is required. (F)
Other options:
* A. 10GbE# Only supported in vSAN OSA, not ESA.
* B. 256GB Memory# Recommended for large workloads, not minimum.
* E. SAS SSDs# Not supported in ESA; NVMe required.
References:
VMware Cloud Foundation 9.0 -vSAN ESA Hardware Requirements
VMware Docs: vSAN ESA Deployment Requirements
NEW QUESTION # 41
An administrator is tasked to deploy a large-scale VDI environment on a VMware vSAN Original Storage Architecture (OSA) cluster.
Which vSAN feature is required to achieve maximum storage space reduction in this cluster?
- A. Compression only.
- B. Deduplication and Compression.
- C. Disable Object Checksum.
- D. Object space reservation.
Answer: B
Explanation:
In avSAN Original Storage Architecture (OSA) cluster, the feature that provides themaximum storage space reductionisDeduplication and Compression.
* Deduplication removes duplicate blocks across the cluster.
* Compression further reduces the space used by unique blocks.
* These are applied at thedisk group leveland are essential inVDI environmentswhere identical VM images consume space.
Why others are incorrect:
* A. Disable Object Checksum# Only reduces CPU overhead, not storage space.
* C. Object space reservation# Controls reserved capacity, not reduction.
* D. Compression only# Reduces space, but less than Deduplication + Compression combined.
References:
VMware vSphere 9.0 -vSAN OSA Space Efficiency Features
VMware Docs: vSAN Deduplication and Compression
NEW QUESTION # 42
An administrator is tasked with developing an automated, repeatable process to:
* Connect to the corporate Active Directory and create a Windows computer object in a defined Organizational Unit.
* Connect to the target vCenter and create a Windows VM from a template.
* Power on the VM and join it to the corporate domain.
Which VMware vSphere Foundation (VVF) component is best suited for this task?
- A. VCF Operations
- B. VCF CLI
- C. VCF Operations Orchestrator
- D. vSphere Supervisor
Answer: C
Explanation:
The scenario describes anautomated, repeatable workflow:
* Create an AD computer object.
* Deploy a VM from a template.
* Power on the VM and join domain.
The correct tool isVCF Operations Orchestrator(formerly vRealize Orchestrator), which:
* Provides automation and integration withActive DirectoryandvCenter APIs.
* Can execute workflows for VM provisioning and domain joining.
Other options:
* A. vSphere Supervisor# Kubernetes workload management, not AD/VM automation.
* B. VCF Operations# Monitoring and analytics, not workflow automation.
* C. VCF CLI# Useful for manual scripting but not suited for automated workflows.
References:
VMware Cloud Foundation 9.0 -VCF Operations Orchestrator Automation Use Cases VMware Docs: vRealize Orchestrator Integration with vSphere & AD
NEW QUESTION # 43
An administrator has enabled a Supervisor on a vSphere cluster. The DevOps team has requested access to vSphere resources such as virtual machines, storage, and networking using Kubernetes tooling. To meet this request, the administrator must provide secure, policy-based access that sets clear boundaries for compute and storage consumption.
Which function is provided by Supervisor services to support this use case?
- A. Enable vSphere Replication between Supervisor Namespaces.
- B. Allow access to vSphere resources through Kubernetes in a configured Supervisor Namespace.
- C. Enable virtual machine backup using native Kubernetes ConfigMaps.
- D. Grant DevOps users administrator access to the vCenter Server system namespace.
Answer: B
Explanation:
WhenSupervisor is enabled:
* It providesSupervisor Namespaces, which grant DevOps teamssecure, policy-based accessto vSphere resources (VMs, storage, networking) through Kubernetes tooling.
* This enforcesboundaries and quotasfor compute/storage consumption.
Other options:
* B. VM backup via ConfigMaps# Not a feature of Supervisor.
* C. vSphere Replication between namespaces# Not a Supervisor function.
* D. Granting administrator access to vCenter system namespace# Violates least-privilege security.
References:
VMware vSphere 9.0 -Supervisor Namespaces and Kubernetes Integration
VMware Docs: Using vSphere with Tanzu
NEW QUESTION # 44
An administrator is tasked with deploying a VMware Cloud Foundation (VCF) Operations for Logs appliance into vSphere Foundation.
After downloading the .ova, which component does the administrator use to deploy the file?
- A. VCF Fleet Management
- B. VCF Operations
- C. VCF Automation
- D. vSphere Client
Answer: D
Explanation:
To deploy theVCF Operations for Logs OVA appliance:
* ThevSphere Clientis used to deploy.ovaand.ovftemplates directly into a vCenter environment.
* After deployment, the appliance can be configured and integrated with VCF.
Other options:
* A. VCF Fleet Management# Used for multi-instance management, not OVA deployment.
* C. VCF Automation# Provides automation workflows, not appliance deployment.
* D. VCF Operations# Monitoring and analytics platform, not used for OVA installs.
References:
VMware Cloud Foundation 9.0 -Deploying VCF Operations for Logs Appliance VMware Docs: Deploy OVF/OVA Templates Using vSphere Client
NEW QUESTION # 45
An administrator is following the concept of least privilege and must configure permissions in a vSphere environment granting members of the group corp\VM-Managers the following abilities:
* Power on/off virtual machines
* Open consoles
* Create snapshots
Which out-of-the-box role satisfies these access control requirements?
- A. Virtual Machine User
- B. Administrator
- C. Virtual Machine Console User
- D. Virtual Machine Power User
Answer: D
Explanation:
The requirement is to followleast privilegewhile granting specific VM operations:
* Power on/off virtual machines
* Open consoles
* Create snapshots
TheVirtual Machine Power Userrole is the correct out-of-the-box role, as it includes all these privileges without granting unnecessary administrative access.
Other roles:
* Administrator (A):Grants full environment control # too broad.
* Virtual Machine Console User (B):Limited to console access, cannot power on/off or snapshot.
* Virtual Machine User (C):Can interact with VMs but lacks snapshot privileges.
References:
VMware vSphere 9.0 Documentation -Default Roles and Permissions
VMware KB 1033138 -Privileges for VM Roles
NEW QUESTION # 46
An administrator is tasked with creating dashboards to track system performance metrics for both the IT department and executive leadership. The requirements for this task are:
* The IT team needs detailed, technical metrics across all of the infrastructure components in the environment.
* The executives need high-level summaries that highlight Key Performance Indicators (KPIs) across the environment in a single dashboard.
* The executives need to access the dashboard via a shared URL.
* The dashboards must be capable of being shared, and always display the latest data collected when the link is used.
What two steps should the administrator perform to meet these requirements? (Choose two.)
- A. Create a Custom dashboard in VCF Operations to highlight Key Performance Indicators.
- B. Use Out-of-the-Box dashboards in VCF Automation to highlight Key Performance Indicators.
- C. Create a Custom dashboard in VCF Operations for Logs to display the Key Performance Indicators.
- D. Use Out-of-the-Box dashboards in VCF Operations to display detailed technical metrics.
Answer: A,D
Explanation:
To satisfy both IT and executive requirements:
* IT team# Needsdetailed technical metrics, which are available throughOut-of-the-Box dashboards in VCF Operations. (A)
* Executives# Need acustom KPI-focused dashboard, with summaries and high-level visibility. This can be shared via aURL linkthat always shows the latest data. (B) Why others are incorrect:
* C. Custom dashboard in VCF Operations for Logs# Logs are not KPI-focused performance metrics.
* D. Out-of-the-Box dashboards in VCF Automation# VCF Automation is not designed for KPI reporting.
References:
VMware Cloud Foundation 9.0.2 -Dashboards and KPI Tracking
VMware Docs: [Custom and Out-of-the-Box Dashboards in vRealize Operations]
NEW QUESTION # 47
An administrator has licensed vSphere components in Connected mode and then switched to Disconnected mode to meet the company security restrictions, which cannot be violated.
What must the administrator do to ensure the VMware vSphere Foundation license remains valid?
- A. Switch to Connected mode, validate that VCF Operations has downloaded a new license file from VCF Business Services console, and then switch to Disconnected mode at least once every 365 days.
- B. Manually exchange a registration and license file between the VCF Operations instance and the VCF Business Services console at least once every 180 days.
- C. Nothing. The license is perpetual.
- D. Provide an internet connection to VCF Operations, then download a new license file from the VCF Business Services console at least once every 180 days.
Answer: B
Explanation:
ForDisconnected mode licensingin vSphere Foundation:
* Administrators must manuallyexport a registration file, upload it to theVCF Business Services console, and thenimport the license fileback into VCF Operations.
* This process must be repeatedevery 180 daysto maintain license validity.
Other options:
* A. Switch to Connected mode once every 365 days# Incorrect; 180-day requirement.
* C. License is perpetual# Not correct; subscription-based license requires refresh.
* D. Provide internet connection every 180 days# Violates security restriction (Disconnected mode is required).
References:
VMware Cloud Foundation 9.0 -Connected and Disconnected Licensing Modes VMware Docs: [vSphere Foundation Licensing with VCF Business Services]
NEW QUESTION # 48
An administrator is tasked to optimize storage utilization in an existing VMware vSAN Original Storage Architecture (OSA) cluster.
The cluster has the following configuration:
* Eight-node cluster with 1 disk group per node.
* Virtual machines (VMs) are configured with 1 failure - RAID-1 storage policy.
* Storage utilization is at 70%.
Which action can the administrator take to reduce the existing storage utilization with the minimum impact to the cluster?
- A. Change the storage policy to 2 failure - RAID-6.
- B. Enable Deduplication and Compression on the cluster.
- C. Enable Compression only on the cluster.
- D. Change the storage policy to 3 failure - RAID-1.
Answer: A
Explanation:
In avSAN Original Storage Architecture (OSA)cluster, the choice of storage policy directly impacts storage efficiency and resilience:
* Current Setup:
* Eight-node cluster, 1 disk group per node.
* VMs are usingFTT=1 RAID-1 (mirroring)policy.
* Storage utilization is already at70%.
* RAID-1 (Mirroring):
* Each piece of data is mirrored, requiring2x storage capacity.
* Space efficiency ~50%.
* RAID-6 (Erasure Coding, FTT=2):
* Requires a minimum of6 hosts, satisfied here with 8.
* Uses erasure coding instead of full mirroring, giving ~67% space efficiency.
* Provides resilience against2 host failureswhile using less space than RAID-1.
Thus, switching fromRAID-1 FTT=1toRAID-6 FTT=2reduces overall storage utilization while still improving resilience.
Why not the other options?
* A. Enable Deduplication and Compression##In OSA, enabling this requires acluster-wide disk group reformat, which is disruptive and not the minimal impact choice.
* B. Change policy to 3 failure - RAID-1##Increases redundancy but consumesmuch more capacity, worsening utilization.
* C. Enable Compression only##Not available in OSA (only in ESA). OSA supportsdeduplication + compression together, not compression-only.
* D. Change to 2 failure - RAID-6##Meets resilience requirements,reduces storage usage, and is supported on 8-node OSA clusters.
References:
VMware vSAN 9.0 Documentation -RAID-5/6 Erasure Coding requires 6+ hosts and improves space efficiency VMware vSAN Design Guide -RAID-1 vs RAID-5/6 efficiency and requirements VMware Cloud Foundation 9.0 Documentation -Changing storage policies triggers online reconfiguration without cluster-wide reformat
NEW QUESTION # 49
Which component of VMware vSphere Foundation (VVF) is essential for supporting containerized workloads within the vSphere environment?
- A. VCF Fleet Manager
- B. VCF Operations
- C. VCF Automation
- D. vSphere Kubernetes Service
Answer: D
Explanation:
To supportcontainerized workloads within VMware vSphere Foundation (VVF), the essential component isvSphere Kubernetes Service (vSphere with Tanzu).
* Provides nativeKubernetes integrationwith vSphere clusters.
* Enables runningPods, Tanzu Kubernetes clusters, and containerized workloadson vSphere infrastructure.
Other options:
* VCF Automation (A):Automates VCF lifecycle but not containers.
* VCF Fleet Manager (B):Manages multi-instance environments, not workload containers.
* VCF Operations (C):Provides monitoring/analytics but not container runtime.
References:
VMware vSphere 9.0 -vSphere with Tanzu Overview
VMware Docs: Kubernetes in vSphere (Tanzu)
NEW QUESTION # 50
An administrator has successfully deployed the VMware Cloud Foundation (VCF) Installer appliance to begin a new VMware vSphere Foundation (VVF) deployment. The VMware ESX hosts are powered on and meet all hardware and connectivity prerequisites.
What is the next step to begin deploying vSphere Foundation?
- A. Launch the VCF Installer deployment wizard.
- B. Manually deploy the vCenter Server Appliance.
- C. Install SDDC Manager using the VCF Installer.
- D. Enable SSH on all ESX hosts.
Answer: A
Explanation:
After successfully deploying theVCF Installer appliance, and ensuring ESXi hosts are powered on and meet prerequisites, thenext stepis to:
* Launch the VCF Installer deployment wizard, which guides administrators through host onboarding, vCenter deployment, and cluster setup forvSphere Foundation.
Other options:
* A. Enable SSH on all ESX hosts# Not required unless troubleshooting.
* C. Install SDDC Manager using VCF Installer# Only applies to full Cloud Foundation, not vSphere Foundation deployment.
* D. Manually deploy vCenter Server Appliance# The Installer wizard automates this.
References:
VMware Cloud Foundation 9.0 -Using VCF Installer for vSphere Foundation VMware Docs: VCF Installer Deployment Workflow
NEW QUESTION # 51
An administrator is tasked to create a new VMware vSAN cluster. The following information was provided to the administrator:
* Should host high performance application.
* Workload is latency dependent.
* Workload, compute and storage must be in the vSAN cluster.
Which configuration should the administrator choose for this vSAN cluster?
- A. vSAN Original Storage Architecture (OSA)
- B. vSAN Express Storage Architecture (ESA)
- C. vSAN Storage Cluster
- D. vSAN Original Storage Architecture (OSA) Stretched Cluster
Answer: B
Explanation:
The workload requirements specify:
* High-performance application
* Latency-dependent workloads
* Compute and storage must reside in the vSAN cluster
The correct option isvSAN Express Storage Architecture (ESA)because:
* ESA is designed forhigh-performance, low-latency applications.
* It leveragesNVMe-based storage devicesand25GbE networking, delivering better IOPS and reduced latency compared to OSA.
* OSA(Original Storage Architecture) is older and less efficient.
* OSA Stretched Cluster(A) is for resilience across sites, not specifically performance.
* vSAN Storage Cluster (B)is a generic term and not specific.
References:
VMware vSAN 9.0 -ESA vs OSA Architecture
VMware Docs: vSAN Express Storage Architecture
NEW QUESTION # 52
An administrator is tasked to create a new storage policy for an eight-node VMware vSAN Original Storage Architecture (OSA) cluster.
The following specifications have been provided:
* Tolerate up to two host failures.
* Ensure maximum usable capacity.
Which storage policy settings must the administrator configure?
- A. 1 failure - RAID-1
- B. 3 failures - RAID-1
- C. 2 failures - RAID-5
- D. 1 failure - RAID-5
Answer: C
Explanation:
For an8-node vSAN OSA cluster, the administrator needs a storage policy that:
* Tolerates2 host failures, and
* Providesmaximum usable capacity.
* RAID-5/6 (erasure coding)is more capacity-efficient than RAID-1 mirroring.
* To tolerate2 failures, the correct policy isRAID-5 with FTT=2.
* RAID-1 (mirroring) would consume far more capacity, reducing usable space.
Other options:
* A. 1 failure - RAID-1# Only tolerates one failure.
* C. 3 failures - RAID-1# Provides higher resilience but uses much more capacity, not maximum efficiency.
* D. 1 failure - RAID-5# Tolerates only one failure.
References:
VMware vSphere 9.0 -vSAN Storage Policy Rules (FTT & RAID)
VMware Docs: vSAN Erasure Coding (RAID-5/6)
NEW QUESTION # 53
What is the purpose of a port group on a Distributed Switch?
- A. To manage storage I/O performance.
- B. To define a logical grouping of virtual ports for network traffic segmentation.
- C. To allocate CPU and memory resources to virtual machines.
- D. To enable vSAN connectivity.
Answer: B
Explanation:
Aport groupon avSphere Distributed Switch (VDS)provides:
* Logical grouping of virtual ports.
* Definesnetwork policiessuch as VLAN IDs, traffic shaping, security policies, and teaming.
* Used for segmenting traffic types (vMotion, vSAN, management, VM traffic).
Other options:
* A. Enable vSAN connectivity# Achieved by assigning vSAN traffic to a port group, but not the main definition.
* B. Allocate CPU/memory resources# Done via resource pools, not port groups.
* D. Manage storage I/O performance# Done with Storage I/O Control, not port groups.
References:
VMware vSphere 9.0 -vSphere Networking Basics
VMware Docs: Port Groups on Distributed Switch
NEW QUESTION # 54
An administrator is tasked with enabling a Supervisor in a VMware vSphere Foundation (VVF) environment using vSphere networking and the Foundation Load Balancer. The vSAN-backed cluster has been configured with a vSphere Distributed Switch.
Which two actions must the administrator perform when enabling a Supervisor using vSphere networking?
(Choose two.)
- A. Select a vSphere namespace template to define initial namespace limits.
- B. Enable the VM Service before deploying the Supervisor.
- C. Assign a vSphere Distributed Switch and a corresponding port group.
- D. Provide a static IP address range for the Supervisor control plane VMs.
- E. Configure a Tier-0 Gateway with BGP or static routing.
Answer: C,D
Explanation:
When enabling aSupervisor Cluster in vSphere with Tanzuusing vSphere networking and the Foundation Load Balancer:
* You must provide astatic IP rangefor the Supervisor control plane VMs so they can be deployed with dedicated addresses. (B)
* You must assign avSphere Distributed Switch (VDS)with an appropriateport groupfor Supervisor networking. (E) Other options:
* A. Namespace template# Optional after Supervisor is enabled, not required at setup.
* C. Tier-0 Gateway# Applies to NSX networking, not vSphere networking.
* D. VM Service# Enabled after Supervisor, not a prerequisite.
References:
VMware vSphere 9.0 -Enable a Supervisor Cluster with vSphere Networking VMware Docs: Supervisor Setup Networking Requirements
NEW QUESTION # 55
......
BraindumpsVCE 2V0-16.25 Exam Practice Test Questions: https://freetorrent.braindumpsvce.com/2V0-16.25_exam-dumps-torrent.html